Quality heated jacket kits for 12 volt systems.
Why shiver and shake through the winter?
This kit when fitted into a lining will keep you warm well below freezing.
It uses the finest flexible 200c deg rated, stranded specialist wire, from the USA
and with teflon coating for years of trouble free heat. It has a quality marine rated plug and socket
(standard on some motorcycles).
See photo above of using wrong type of plug!
With full short circuit protection.
Two heated jackets can easily be run from most motorcycles.
Warms up fast - you will feel heat in about 20 seconds.
Low power consumption, drawing only 55 watts.
You will be able to ride warm & comfortable even when temperatures are in the 40's,or
less.
HOT temperature in less than 20 seconds.
Takes less than an hour to make from start to finish.
Just a simple running stitch and with wire teflon coated, it slides into the
material very easy!
The kit is complete right down to the needle.
With straight forward, easy to follow colour photos and instructions.
All the tools you will require are a pair of wire crimps, a knife and screwdriver.
TFE Teflon is rated for continuous operation in temperatures from -60°C to 200°C and
retains its exceptional toughness and flexibility within this range. TFE Teflon is not degraded
by chemicals which makes it ideal for use in harsh environments. Teflon is widely regarded as the
ultimate high performance wire insulation material for environments characterised by extreme thermal
or chemical conditions.
- Resistance to all Chemicals.
- High temperatures use up to 200°C.
- Low coefficient of friction.
- Oustanding electrical properties.
KITS IN STOCK FOR IMMEDIATE DELIVERY
Back To The Top
